Day after day your humble and hard working router holds your home network together and links it to the greater internet. Is it possible to work it to death?
Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites.
The Question
After having more than his fair share of trouble with a home router, SuperUser reader JQAn posed the following question to the community:
Can you wear out a router like an old car? Let’s take a look at the community response.
I have cable modem with a Wi-Fi router (this router was not provided by them).
The router is quite old (DIR-300), so I’m starting to wonder if it could be the issue and if I should replace it.
Is it possible that it is the cause? Can they become so outdated that they cause intermittent interruptions of service?
If I reset the modem and the router, they work fine for a few hours, but the problems starts again after a while.
The Answers
SuperUser contributor John weighs in on the matter and offers some trouble shooting insight:
Contributor Climenole points out that heat is most likely the culprit:
In general, routers can and do fail. The primary cause of failure for consumer grade equipment is heat stress. Most consumer grade hardware runs far too hot and have respectively poor air circulation compared to their ventilation needs.
Long-term exposure to heat causes various components to degrade/fail and manifests itself as “intermittent” problems. In general, consumer grade hardware is not as robustly made as commercial or enterprise hardware. But all physical devices are subject to physical effects.
It’s not uncommon for consumer grade devices to fail within a few years due to heat or vibration issues. Routers stuck near windows (argh! the sun!), placed on the floor (dust!), or jammed into a bookcase (no air flow) are especially prone to failures. Contrast that with commercial grade devices which are often still working for 10 or more years after their first deployment.
Most cable modems have either an Ethernet port or Wi-Fi ability. To isolate the cause of your network problems, you should consider bypassing your router and plugging your PC/laptop directly into the cable modem to see if whether or not you experience the same problems.
Of course, bypassing the router means you bypass the router’s firewall protection and NAT abilities so take due precautions on your computer.
While there’s no shortage of how-to guides over at Instructables to help guide you through adding a heatsink/fan to a router, unless you’re in the mood for a DIY solution that may not ultimately fix your problem it’s often easier to just buy a new router.
“Any transformation of a thermodynamic system is carried out with increase in entropy including overall entropy of the system and the external environment.»
You wrote:
If I reset the modem and the router, they work fine for a few hours, but the problems start again after a while.
This may be an overheating problem or the overheating is the symptom…
The easiest way to check if the router is Out of Service or near to this inevitable state, you may try with another one temporary (from a friend for example). If this solved the Internet connection problems, you have the answer.
For more information about routers from the How-To Geek archives, make sure to check out:
HTG Explains: Understanding Routers, Switches, and Network Hardware Turn Your Home Router Into a Super-Powered Router with DD-WRT Boost Networking Performance by Installing Tomato on Your Router The Best Wi-Fi Articles for Securing Your Network and Optimizing Your Router
Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion threads here.
